News

New Screen Orders Captured by SPIRAC for Wastewater Treatment Plants in the Midlands

In the West Midlands, two of SPIRAC’s BANDGUARD screens are due to be installed at the inlet works of a strategically important WWTP.

In the West Midlands, two of SPIRAC’s BANDGUARD screens are due to be installed at the inlet works of a strategically important WWTP.

WD News: SPIRAC has won a new order to supply four of its proven screens to wastewater treatment plants in the Midlands.

A dual-flow traveling fine screen, SPIRAC’s BANDGUARD prevents screenings accumulation with an exceptional capture rate that significantly reduces maintenance costs in downstream equipment.

The high level of screening is achieved by passing sewage through a vertical band-shaped screen curtain. This comprises an assembly of plastic perforated panels, clipped and fastened into stainless-steel frames that are fastened to stainless-steel conveyor chains to form two endless loops.

Screenings enter the centre of the screen (inside of the screen curtain), where solids are retained and transported out of the flow by driving the band, moving the dirty panels from the screening zone to the panel cleansing area.

In the West Midlands, two of SPIRAC’s BANDGUARD screens are due to be installed at the inlet works of a strategically important WWTP.

Robert Gericke, General Manager of SPIRAC UK, said: “During a phased install, we can ensure that there is no downtime. Demand for our screens, which are designed and manufactured in England for strength and rigidity, is increasing. Together with our conveyors, grit and biosolids handling equipment, as well as dewaterers, we offer a complete package.”

For a water company’s inlet works in the East Midlands, SPIRAC is also supplying two of its FINEGUARD screens.

FINEGUARD uses a two-stage panel cleaning process. The first stage includes a self-adjusting rotating brush that removes most of the debris. The second stage uses water jets to prevent screen panels becoming blinded by hair-pinning and rag-stapling. The fully retractable spray bar allows cleaning if necessary.

Each panel has a replaceable side seal manufactured from wear-resistant Ultra-high-molecular-weight polyethylene (UHMWPE). To minimise head-loss, the plates incorporate side outlet passages at flow level to allow passage of screened flow.

Source & image courtesy: SPIRAC

Leave a Comment

Your email address will not be published.

You may also like

Read More